Protective Panels for Lining Doors and Walls:
  • Overview:
  • Features:
    • Bullet Resistant Fiberglas Panels are flat sheets of a polyester laminate reinforced with a fiberglass scrim to create a material with superior durability.
    • The densely packed structure of the panel exhibits an excellent capability to absorb multiple impacts from high velocity projectiles, limiting ricochet or shattering.
    • They meet standards of U.L.752 Ballistic Performance Requirements Test, as well as all bullet resistant test requirements set forth by the National Institute of Justice.
    • Typical applications include lining of bank teller counters, ticket booths, judge's benches, doors and walls of secure enclosures, and other structures where concealed panels will add to the safety of service personnel.
    • All panels are: 96" (2438.4mm) x 48" (1219.2mm)
    • More cost efficient than Kevlar panels
 
Part # Protection
Level		 Panel
Thickness		 Panel
Weight
BRP100 1 1/4" 80 lbs.
BRP200 2 5/16" 122 lbs.
BRP300 3 1/2" 160 lbs.
BRP400 4 1-3/8" 464 lbs.
BRP500 5 1-3/8" 480 lbs.
BRP600 6 3/8" 128 lbs.
BRP700 7 1-1/8" 384 lbs.
BRP800 8 1-3/8" 480 lbs.

Protection Level Specs
Protection
Level Rating		 U.L. 752
Ballistics Description
  • Ballistic testing was conducted by an independent laboratory using test criteria set by Underwriters Laboratories.
  • Testing of supplied bullet resistant glazing was conducted by or for the respective manufacturers of these products.
  • Testing of bullet resistant products by unqualified personnel is discouraged.
  • For your reference, we have included the following Ballistic Protection Guide.

Ballistic Protection Guide
Standard Weapon
Calibre		 Bullet
Weight		 Bullet
Velocity
( fps)		 Number
Of
Shots		 Range
( ft )		 Threat Level
Rating
NIJ .22L.R. 40 1050 5 16 1
NIJ .38spec 158 850 5 16 1
NIJ 9mm/19 ( LV ) 124 1090 5 16 2-A
UL 9mm/19 ( LV ) 124 1175 3 15 1
NIJ 9mm/19 ( HV ) 124 1175 5 16 2
UL .38 Super auto 130 1248 3 15 1
UL 9mm 124 1400 5 15 6
NIJ .357 mag 158 1250 5 16 2-A
UL .357 mag 158 1250 3 15 2
BSI .357 mag ( HV ) 158 1476 3 9.84 G1
BSI 9mm/19 ( HV ) 115 1345 3 9.84 G0
UL .44 Mag 240 1350 3 15 3
BSI .44 Mag 240 1549 3 9.84 G2
NIJ .44 Mag 240 1400 5 16 3-A
UL .30-06 180 2540 1 15 4
UL 7.62mm 150 2750 1 15 5
UL 5.56mm 55 3080 5 15 7
BSI 7.62/51mm 147(M80) 2707 3 32.81 G3
UL 7.62mm 150 2750 5 15 8
NIJ 7.62/51mm 147(M80) 2750 5 16 3
NIJ .30-06 165(AP.M2) 2850 1 16 IV

 
  • NIJ - National Institute of justice, U.S Department of Justice, Ballistic Protective Materials, NIJ Standard - 0108.01, September 1985
  • UL - ANSI American National Standards Institute / Underwriters Laboratories, Inc.Standard for Bullet - Resisting Equipment.
  • BSI - British Standards Institution, Security Glazing, Part 1. Specification for Bullet - Resisting Glazing for Interior use BS 5051, October 1973
     
  • The various standards specify different locations to measure the bullet velocity. They are as follows: UL - At muzzle; BSI - Strike face of target; NIJ - 6.60 ft from weapon muzzle. For meeting the various velocity measurment requirements, the use of (special) powder loads may be required.
Abbreviations:
  • AP - Armorpiercing
  • HV - Higher Velocity
  • SRP - Soft Round Point
  • LD - Lead
  • LV - Lower Velocity
  • M2, M80 - U.S Military, Full Metal Jacket, Spire Point

Request a Quote    |     Email     |     Toll Free: 1-866-300-5122    |    Site Map

Copyright © 2006 Advanced Protection Products Inc..  Text, graphics, photos and videos are protected by
Canadian and International Copyright Laws and may not be copied, reproduced, published, translated,
hosted, or otherwise distributed by any means without prior written permission.

E.&O.E. - Specs subject to change and will be confirmed at time of quote or ordering.